Knowledge

Even when the repaired motor is activated, it should not be taken lightly

Mar 14, 2024 Leave a message

If the motor encounters not very serious faults, it can generally be put back into use after being repaired by professional personnel. At this time, it is important to pay attention to conducting some inspections before starting the motor after repair to avoid problems from happening again.
After multiple steps such as disassembly, cleaning, maintenance, and assembly, the motor has returned to its normal state. However, for the sake of operational safety, it is extremely necessary to conduct some checks before starting. Firstly, check whether the various components of the motor are installed accurately and in place, and whether the coordination between the components is good and firm; Secondly, check the cleanliness of some key components, such as the commutator, collector ring, etc., and also check whether the brushes are complete and whether the pressure of the accessory springs is even.
This is not over yet. It is necessary to check the configuration and sealing of the motor cooling system, and drain all the controls inside the cooler. Finally, don't forget to install the safety protection system and check the connection status of the circuit, only then can the motor be reactivated in a foolproof manner.

 

Send Inquiry