Knowledge

How to judge whether the brushes of Large Size DC Motor need to be replaced?

Jan 29, 2025 Leave a message

1. Observe the degree of brush wear
Length: Check the length of the brush regularly (for example, once a month). When the brush is worn to 1/3 - 1/2 of the original length, it is generally necessary to consider replacement. Because too short brushes cannot ensure good contact with the commutator, and the point of action of its spring pressure will also change, which can easily lead to unstable contact. For example, for a brush with an initial length of 50mm, when the length is worn to about 25 - 33mm, it should be replaced.
Contact surface shape: Check the contact surface between the brush and the commutator. The normal contact surface of the brush should be flat and fit well with the commutator. If there are obvious pits, gaps or unevenness on the contact surface of the brush, this will affect the conduction of current, increase the contact resistance between the brush and the commutator, and generate sparks. At this time, the brush needs to be replaced.
2. Check the working status of the brush
Spark situation: During the operation of the motor, observe the sparks generated between the brush and the commutator. Under normal circumstances, only weak, almost invisible sparks will be generated between the brush and the commutator. If more obvious sparks appear and the spark level exceeds level 1.5 (according to the brush spark level standard, sparks above level 1.5 will damage the brush and commutator), this may be caused by brush wear, improper brush pressure, or uneven commutator surface. After excluding other factors, if the spark problem still exists, the brush needs to be replaced.
Temperature change: Use an infrared thermometer to measure the temperature of the brush. The temperature of a normal working brush should be within a reasonable range and generally will not exceed 80-100℃ (the specific value varies depending on factors such as the motor working conditions). If the brush temperature is too high, in addition to considering factors such as motor overload and poor ventilation, the wear or poor contact of the brush itself may also be one of the reasons. When the brush temperature continues to be too high and cannot be reduced by other means, it is necessary to check whether the brush needs to be replaced.
3. Check the spring pressure of the brush
Measure the spring pressure of the brush with a spring scale. Normal brush spring pressure should be maintained between 15 and 25 kPa. If the spring pressure is not within this range, it may be caused by spring aging, deformation or excessive wear of the brush. When the spring pressure cannot be restored to the normal range by adjustment and the brush has been worn to a certain extent, the brush needs to be replaced because abnormal pressure will affect the contact quality between the brush and the commutator.

Send Inquiry