Knowledge

How to judge whether the COLD MILL Motor is faulty by sound?

Aug 02, 2024 Leave a message

1. During normal operation, the COLD MILL Motor should emit a steady and uniform humming sound. If you hear the following abnormal sounds, it may mean that there is a fault:
Sharp screams: It may be that the bearing is severely worn, and the friction between the ball or roller and the raceway increases.
Dull whirring sound: It may be a fan failure, affecting the heat dissipation of the motor, or the motor ventilation duct is blocked.
Uneven noise that is sometimes high and sometimes low: It may be that the power supply voltage is unstable, or there is a local short circuit in the motor winding.
Rhythmic knocking sound: It may be that the rotor and the stator are rubbing, or the end cover and the shaft are loose.
Scratching sound: It may be that there is foreign matter entering the motor, or there are scratches on the surface of the stator and rotor core.
2. Changes in the volume of the sound can also provide clues:
The sound suddenly becomes louder: It may be that the motor is overloaded, or a component is suddenly damaged.
The sound gradually becomes louder: It may be that some parts are gradually worn out. For example, the wear of the bearing is a gradual process, and the sound will become louder as the wear increases.
3. Pay attention to the frequency changes of the sound:
High-frequency noise: It may be that some high-speed rotating parts, such as fans, are unbalanced or faulty.
Low-frequency noise: It may be related to the mechanical structure of the motor, such as the bending of the shaft.

Send Inquiry