1. Check the coolant regularly
Check the coolant level: Check the coolant level regularly to ensure that the coolant is sufficient. If the level is insufficient, it should be replenished in time.
Check the quality of the coolant: Check the quality of the coolant regularly. If it is contaminated or deteriorated, it should be replaced in time.
Replace the coolant: According to the manufacturer's recommendations, replace the coolant regularly, usually every 6 months or 1000 hours.
2. Check the sealing of the cooling system
Check for leaks: Check the sealing of the cooling system regularly to check for leaks. Pay special attention to the sealing of the coolant pipes, joints and radiators.
Tighten the connectors: Check and tighten all connectors of the cooling system to ensure that they are not loose.
3. Clean the radiator
Clean the radiator regularly: Clean the radiator regularly to remove dust and debris to ensure that the heat dissipation effect of the radiator is good. Compressed air or a soft brush can be used for cleaning.
Check the radiator fins: Check whether the radiator fins are deformed or damaged. If damaged, they should be repaired or replaced in time.
4. Check the cooling fan
Check the fan operation status: Check the cooling fan operation status regularly to ensure that the fan can operate normally. Check whether the fan blades are damaged or deformed. If damaged, replace them in time.
Clean the fan: Clean the cooling fan regularly to remove dust and debris to ensure the fan's operating efficiency.
5. Check the cooling water pump
Check the water pump operation status: Check the cooling water pump operation status regularly to ensure that the water pump can operate normally. Check whether the water pump has abnormal sounds or vibrations. If abnormal, check and repair it in time.
Check the water pump sealing: Check the water pump sealing to ensure that there is no leakage.
6. Check the cooling system pipeline
Check the pipeline integrity: Check the integrity of the cooling system pipeline regularly to check for cracks, wear or damage. If damaged, replace it in time.
Check the pipeline connection: Check whether the connection of the cooling system pipeline is firm to ensure that there is no looseness or leakage.
7. Regular maintenance and inspection
Regular maintenance: Perform regular maintenance and inspection of the cooling system according to the manufacturer's recommendations. A comprehensive inspection is usually performed every 3 months or 500 hours.
Record maintenance: Record the content of each maintenance and the problems found in detail for easy tracking and analysis.
8. Environmental maintenance
Keep clean: Keep the cooling system clean, clean the coolant tank and pipes regularly to prevent dirt and debris from affecting the cooling effect.
Control temperature: Ensure that the working environment temperature is within the appropriate range to avoid excessively high temperatures affecting the performance of the cooling system.
